General Discussion

Expand all | Collapse all

Introduce Yourself

Anonymous Member06-08-2017 21:49

  • 1.  Introduce Yourself

    Posted 06-07-2017 17:46
    Introduce yourself to the community and let us know what you hope to get out of MEGA.

    ------------------------------
    CJ James,
    SAMPE
    ------------------------------


  • 2.  RE: Introduce Yourself

    Posted 06-08-2017 01:13

    Hi I am kiran from India






  • 3.  RE: Introduce Yourself

    Posted 06-08-2017 04:12
    Good Morning from Luxembourg

    I am part of the new material revolution with OCSiAl.  The worlds largest producer of single wall carbon nanotubes with a vision to augment 70% of the worlds materials ranging from energy to composites to coatings.  Forming a new wave of technology.

    ------------------------------
    Michael Enotiades
    [Sales Manager EMEA]
    OCSiAl Europe S.a.r.l
    Luxembourg
    ------------------------------



  • 4.  RE: Introduce Yourself

    Posted 06-08-2017 07:42
    Hello - Jim Sharkey here.  Based in Vermont with 35 years of experience in the aerospace and composites industries.  Currently a self employed consultant.

    ------------------------------
    James Sharkey
    [JobTitle]
    Sharkey Design LLC
    BENNINGTON VT
    ------------------------------



  • 5.  RE: Introduce Yourself

    Posted 03-06-2018 18:52
    My name is Rogelio Ballesteros, I joined SAMPE years back as part of my professional development when I started working with composites around 12 years ago as a materials and process engineer.by bachelor is Chemical Engineering and then I moved into the materials universe when pursuing my master and later my doctorate degree. I'm located in Mexicali, Baja California Mexico and work for Honeywell, currently my role is manager for materials testing but I still have my foot in the door in composites auditing as a NUCAP Network Auditor and also a HON certifying agent for HLPP, CP, MB and RTM. I'm also a part time teacher at the state university working with aerospace engineering students to learn about composites processing and coach them to participate at the annual SAMPE bridge contest, hopefully i get to see some of you.

    what I would expect from Mega is having this space for collaboration and communication, please feel free to contact me in whatever I can be of assistance, currently I'm working to integrate into the new SAMPE chapter for MExico and become an active member helping drive growth within my country.

    ------------------------------
    Rogelio Ballesteros
    Technical Manager
    Honeywell
    https://www.linkedin.com/in/rogelio-ballesteros-7b074427/
    ------------------------------



  • 6.  RE: Introduce Yourself

    Posted 06-08-2017 11:12
    Hello everyone,

    My name is Yourri-Samuel Dessureault, and I am a PhD candidate at Florida State University working towards understanding how manufacturing parameters affect the mechanical properties of semicrystalline thermoplastic composites. My undergraduate degree specialized in Composite Materials Engineering giving me a fundamental understanding of the manufacturing and behavior of both thermoset and thermoplastic composites. As an undergraduate, I worked for Celanese Corporation where I discovered my passion for thermoplastic composites. Here at Florida State University, I am the vice president of the FAMU-FSU SAMPE Student Chapter and the head coordinator of the National Science Foundation sponsored RETREAT and Air Force sponsored DREAM summer Research Experiences for Undergraduates programs.

    ------------------------------
    Yourri-Samuel Dessureault
    Graduate Research Assistant – High-Performance Materials Institute
    PhD Candidate – Department of Industrial and Manufacturing Engineering
    Student Vice Chair – SAMPE FAMU-FSU Chapter
    Florida State University, Tallahassee, FL 32310
    (507) 313-8666
    ------------------------------



  • 7.  RE: Introduce Yourself

    Posted 06-08-2017 13:07
    Hello,
    I'm John Kesapradist.  I have been at SSL (formerly Space Systems/Loral) in Palo Alto, CA for 20 years, spending about have that time working with graphite-reinforced composites.  I was also at Research Opportunities, Inc. in Los Angeles for 7 years, working with high modulus/high thermal conductivity graphite fibers.  If you are in the SF Bay Area and need some help or advice on composite materials, let me know.

    ------------------------------
    John Kesapradist
    Space Systems/Loral
    Palo Alto, CA
    ------------------------------



  • 8.  RE: Introduce Yourself

    Posted 06-08-2017 21:35

    Hello everyone,

     

    My name is Takuya Saito.

    I work for SGL Carbon Japan Ltd.

    I have been at SGL for 1 year.

    Composites are relatively new field for me.

    But with experiences in my former job, I support customers' development and design from the material side, a carbon fiber producer.

    I was an engineering designer in automotive industry.

     

    Fiber Reinforced Plastic is really interesting.

    This material is not isotropic like steel or aluminum.

    Designers have to understand this anisotropic properties and have to design not only a geometry of a part but a distribution of material properties.

     

    I'd like to discuss how advanced materials are used overseas here.

     

    Thanks.

    Kind regards,

     

    ___________________________________________________________________

    Takuya Saito

    Field Application Engineer

    SGL Carbon Japan Ltd.
    SGL Group - The Carbon Company                   Broad Base. Best Solutions.
    ___________________________________________________________________






  • 9.  RE: Introduce Yourself

    This message was posted by a user wishing to remain anonymous
    Posted 06-08-2017 21:49
    This post was removed


  • 10.  RE: Introduce Yourself

    Posted 06-09-2017 17:23
    Edited by Allan Wood 06-09-2017 17:25
    Hello from Salt Lake City!  I am Allan Wood, and I am glad to join this forum.  I work with AnalySwift, a company that offers unique multiscale, multiphysics modeling software for composite materials and structures.  We hope to keep abreast of what's happening in the industry and offer assistance where possible.

    ------------------------------
    Allan Wood
    President & CEO
    AnalySwift
    West Jordan UT
    ------------------------------



  • 11.  RE: Introduce Yourself

    Posted 06-10-2017 11:06
    New old member. Back to selling 5 axis high speed milling machines, thermoforming systems and Waterjet Cutting machines into the Advanced Materials arena. Glad to be back with CMS North America.
    Joe Bockrath
    949-678-4782






  • 12.  RE: Introduce Yourself

    Posted 06-12-2017 09:13

    Andy, welcome to the group.

     

     

     

     

    Timothy Shaughnessy

    Rapid Cure Technologies

    7030 Fly Rd

    East Syracuse, New York 13057

    Cell - 315–399-8055

    tim@rapidcuretechnologies.com

     

    Corporate Headquarters and R&D 1

    7030 Fly Road

    East Syracuse, NY 13057

     

    R&D 2 and Manufacturing

    48 N. Airport Rd

    Kimball, MI 48074

     

    R&D 3 and Manufacturing

    25 Freedom Way

    Saratoga Springs, NY 12866

     






  • 13.  RE: Introduce Yourself

    Posted 06-23-2017 11:15
    Hi everyone!
    I'm Jeff Thompson a new member joining from New Jersey. I work for Mafic USA a basalt fiber production company and help develop markets and interest in basalt fiber products.

    We at Mafic are excited about our new US production facility for basalt fiber, the first of its kind here in North America!

    ------------------------------
    Jeff Thompson
    Mafic USA
    Email: Jeffrey.Thompson@Mafic.com
    (c) 203.505.7136
    ------------------------------



  • 14.  RE: Introduce Yourself

    Posted 06-23-2017 18:16
    Greetings from Oregon!

    I'm Chantelle and I use lasers to make drone parts. Well, not me PERSONALLY, but my company does. I enjoy educating people on additive manufacturing.

    I attended the SAMPE conference in Seattle for the AM track and really enjoyed it.

    ------------------------------
    Chantelle Sims
    Project Engineer
    NW Rapid MFG LLC
    McMinnville OR
    ------------------------------



  • 15.  RE: Introduce Yourself

    Posted 07-13-2017 12:19
    Hi All,

    My name is Eva (shortcut) and I am a PhD student in the Institute of Materials and Processes (IMP) in the University of Edinburgh. I hold a BSc in Material Science and a MSc in Polymer Science and Technology. Generally, my past, present and (maybe) future involves composite materials and their performance. Currently, I am studying the performance of CFRP for impact damage. My skills includes the manufacturing, the thermal, electrical and mechanical aspects on the characterization of those systems. Moreover, my work involves a sophisticate computational software that can simulate dynamically and statically, therefore I am using LS-DYNA.

    See you soon around the conferences..

    Best,

    Eva

    ------------------------------
    Evanthia Pappa
    PhD student
    IMP
    The University of Edinburgh, UK
    ------------------------------



  • 16.  RE: Introduce Yourself

    Posted 07-26-2017 09:18
    Hello guys,

    I know i'm a few days late but, I'm Eric Anyanwu. I am a relatively recent graduate from University of North Texas with a Mechanical and Engineering degree.  I currently work as a Project Engineer for Diab Americas LP. We fabricate, test, and manufacture composite core materials for wide range of markets including marine, wind energy, transport, aerospace and industry. 

    ------------------------------
    Eric Anyanwu
    Project Engineer
    Diab Americas LP
    Desoto TX
    ------------------------------



  • 17.  RE: Introduce Yourself

    Posted 08-08-2017 02:44
    Good morning,
    I am Asier Gandarias Mintegi.
    Working at Danobat in the Composites Division, as business developer.
    Mainly focused in automated manufcaturing systems/solutions for CFRP parts.
    Feel free to contact me at any time on this topic.
    Regards,
    AGM

    ------------------------------
    Asier Gandarias-Mintegi
    Business Development
    Danobat S.Coop.
    E-20870 Elgoibar, Basque Country
    ------------------------------



  • 18.  RE: Introduce Yourself

    Posted 11-23-2018 14:11
    Hello All,
    Joined SAMPE as a student back after I learned about it at CAMX 17. Now I started my career becoming a M&P eng. for a heat shield manufacturer. Currently working on large scale projects with JPL and DoD. Looking to become a vendor at CAMX 19. I am excited to become more involved with SAMPE.

    ------------------------------
    Matthew Kelly
    Materials and Process Engineer
    Peraton-Acusil Division
    Colorado Springs CO
    ------------------------------



  • 19.  RE: Introduce Yourself

    Posted 08-09-2017 02:12

    Hello my name is Bill Castaneda, it is very nice meeting you all. I have been a member of SAMPE since the mid 90's, I have work in advanced composites for over 25 year, in heat process, bonding, raw materials, design and tooling. Also I spend 8 years in Europe working with Airbus and EMBRAER.

    Now days I have my own company in Southern California and Mexico, and also I'm the International Sales Director for CFoam Ltd.
    If you have any questions please let me know.

    Regards

    Bill Castaned



    ------------------------------
    Bill Castaneda
    President / CEO
    GYNSA Advanced Aerospace Group
    Tijuana BCN
    ------------------------------



  • 20.  RE: Introduce Yourself

    Posted 09-02-2017 02:13

    Hello everyone,

    Great to be part of a diverse group of professionals at SAMPE and looking forward to any opportunity to coach / mentor in the areas of: 

    Quality Systems and ISO Standards (9001, 13485, AS 9100, and several others)
    Use of statistical methods and Designed Experiments in Materials / Process development and engineering
    Lean and Six Sigma applications
    Speaking opportunities at conferences / events

    My interests are developing materials and processes for novel applications; last company I started was with a friend of mine where we eliminated the use of toxic lead in radiation shielding.

    Thanks for taking time to read, and hope to hear from you.

    Rai



    ------------------------------
    Rai Chowdhary
    CEO
    The KPI System
    Taylorsville UT
    ------------------------------



  • 21.  RE: Introduce Yourself

    Posted 09-19-2017 23:48
    Edited by Nyal Smith 09-19-2017 23:48

    Hello, SAMPE! My name is Nyal Smith and I am currently a senior in high school studying advanced composites at the Granite Technical Institute (GTI). Previously, I studied engineering at the GTI, covering the basics of engineering design there. I am a music lover, singer, and piano player.

    I am hoping to acquire more knowledge of composites through SAMPE, and someday become either mechanical, structural, or civil engineer. 



    ------------------------------
    Nyal Smith
    Student at Cyprus High
    nyalsmith101@gmail.com
    ------------------------------



  • 22.  RE: Introduce Yourself

    Posted 10-04-2017 08:14
    ​Hello, everyone! My name is Meredith, and I work with Boeing in South Carolina. My primary role is performing materials research for advances in aerospace. I've worked with pre-impregnated carbon fiber composite materials as well as multiple exterior coating systems.

    I'm new to SAMPE but looking forward to the networking opportunities and getting more involved! I've recently joined the Young Professionals Committee.

    ------------------------------
    Meredith Nix
    Materials, Process & Physics Engineer
    The Boeing Company
    North Charleston SC
    meredith.p.nix@boeing.com
    ------------------------------



  • 23.  RE: Introduce Yourself

    Posted 10-05-2017 10:39
    ​Welcome Meredith! I am also new to SAMPE, and currently working at Boeing but at the Everett site. I hope to meet you at future SAMPE or Boeing events! I am a structural design engineer and work on primary composite structure, specifically panels. I have joined the Bridge Competition Committee this year and can't wait for the next conference!

    ------------------------------
    Katelyn Virga
    Structural Design Engineer
    The Boeing Company
    Everett, WA
    ------------------------------



  • 24.  RE: Introduce Yourself

    Posted 10-06-2017 02:02
    I do not know how to adequately verbalize how important I have found "networking" in (person) at  SAMPE and other professional environments for technical knowledge, common problems/interests/professional development.   You can't find everything on the internet.  I find much more from meeting my peers, customers, suppliers in person.  Check out the Women in SAMPE event at Orlando.

    Welcome to SAMPE !  You are in a great SAMPE chapter and should get involved!

    ------------------------------
    Vincent Bailey
    [JobTitle]
    Composites Specialists
    Laguna Niguel CA
    ------------------------------



  • 25.  RE: Introduce Yourself

    Posted 10-10-2017 02:14
    Hello,
    I am a graduate student in University of Nevada, Reno, working towards MS in Mechanical Engineering. My research interest is thermal management in batteries and super-capacitors. Currently, I am working on synthesis and characterization of Graphene based composites.

    ------------------------------
    Walid Ghani
    Graduate Research Assistant
    Department of Mechanical Engineering
    University of Nevada, Reno
    ------------------------------



  • 26.  RE: Introduce Yourself

    Posted 10-13-2017 15:12
    Hello everyone ! I'm Jean from France !

    ------------------------------
    Jean Pourtier
    Ph.D. student
    IRT M2P

    ------------------------------



  • 27.  RE: Introduce Yourself

    Posted 10-16-2017 15:29
    Hi,

    I am Arpith Siddaiah, a PhD student at the Department of Mechanical Engineering, University of Nevada, Reno, USA.
    Currently, I work as a Research Assistant at the Surface Engineering and Tribology Lab and my research interests deal with surface texturing, nanoparticle surface coatings, tribo-corrosion and friction enhancing micromechanical systems.

    Please see my complete research profile at the below link:
    https://www.researchgate.net/profile/Arpith_Siddaiah

    Its a pleasure to a part of this community.



    ------------------------------
    Arpith Siddaiah
    Research Assistant, PhD Student
    Department of Mechanical Engineering
    University of Nevada
    Reno NV
    ------------------------------



  • 28.  RE: Introduce Yourself

    Posted 02-26-2018 17:43
    Edited by Francisco Fernandes 02-27-2018 06:30
    Hi everyone

    My name is Francisco Fernandes, from Lisbon Portugal.
    My experience with composites started during my bachelor while I was part of the ISEL Formula Student team.
    For my master thesis I partnershiped with Terma Aerostuctures A/S to convert an aluminium sub-assembly to a single composite structure using a RTM process.
    Currently I am developing solutions to improve RTM & SQRTM processes.

    If you feel that there might be something I can help you with, please feel free to reach out :)

    Cheers

    ------------------------------
    Francisco Fernandes
    Lisboa
    ------------------------------



  • 29.  RE: Introduce Yourself

    Posted 03-01-2018 22:05
    Hii Everyone,

    My name is Sandesh Hegde.

    I am a graduate student in the Dept of Mechanical, Industrial and Aerospace Engineering at Concordia Unversity, Montreal, Canada.

    My research as part of my thesis is related to Composite Honeycomb Sandwich Structures for Space Applications, at Concordia Centre for Composites, under the supervision of Prof Mehdi Hojjati.

    Feel free to contact me for any help related to the topic, I will help you to the best of my knowledge.

    Good Day.

    ------------------------------
    Sandesh Hegde
    MSc student, Concordia Center for Composites,
    Department of Mechanical, Industrial and Aerospace engineering,
    Concordia University, Montreal, Canada.
    Phone Number: +1 514 5622 749
    E-mail: s_hegd@encs.concordia.ca, sandeshrhegde@gmail.com
    ------------------------------



  • 30.  RE: Introduce Yourself

    Posted 05-31-2018 12:35
    My name is Thomas Odenwalder. I'm a Design Engineering Technology and Manufacturing Engineering Technology student at Weber State University in Ogden, UT. I'm just learning about SAMPE and getting involved in our student chapter. I find materials and their production to be a most interesting field of study and hope to understand more through this group.

    ------------------------------
    Thomas Odenwalder
    ------------------------------



  • 31.  RE: Introduce Yourself

    Posted 06-01-2018 11:38
    Glad to hear

    Sent from my iPhone




  • 32.  RE: Introduce Yourself

    Posted 06-11-2018 11:40
    Hi everyone,

    I'm a colleague of Thomas Odenwalder, also a Manufacturing Engineering student at Weber State University in Ogden Utah, and planning on graduating with a B.S. this fall.

    I've also been working full time with the Boeing company in Salt Lake City for four years now, doing green composite automated layup and other fabrication tasks.

    I was recently hired by Boeing to be a manufacturing planner, and I'm looking forward to this as it will deal with a side of composites I don't yet have a lot of experience with, ie post-cure assembly, bonding, and metals to composite interfaces.

    I have been the WSU chapter president of SAMPE for the past year and have helped grow our brand new chapter on campus, enjoying telling smart people about the unique advantages of composites in design and fabrication.

    Looking forward to connecting with you all!

    Austin Loveless

    ------------------------------
    Austin Loveless
    Boeing Manufacturing Planner
    Salt Lake City UT
    ------------------------------



  • 33.  RE: Introduce Yourself

    Posted 06-18-2018 13:36
    Hello Everyone,

    Blindajes Goldman is formed as an international company with presence in USA and Mexico, with more than 12 years of experience in the industry of armoring and integral security, serving the government and private sector.

    We work on objectives of excellence, standardization of processes and continuous improvement, we integrate in all armoring ballistic materials certified by the main international laboratories.

    Armoring Goldman has a 40,000 square foot plant with installed capacity to produce all types of armored vehicles and special solutions.

    The care and attention paid to the details have differentiated us in the armoring industry, allowing to have original finishes in the vehicles. One of the main strengths is to have vehicles for immediate delivery.

    Divisions We Manufacture:

    1. Armoring of vehicles in different levels of protection and special specifications according to each Project.
    2. SWAT tactical vehicles with our Goldman Defender line in 3 versions (own design and 100% manufactured in our Tijuana plant).
    3. Intelligence vehicles.
    4. Technology vehicles for different uses as well as work units with energy and special adaptions
    5. Military vehicles together with IMI (Indus  http://www.imi-srael.com/home/doc.aspx?mCatID=63195
    6. CARMOR License http://www.carmor.com/welcome-carmor/ for the manufacture of its vehicles in Mexico and to be able to export to other parts of the world.


    ------------------------------
    Joseph Buchsbaum
    Goldman Tech, S. de R.L. de C.V.
    Ciudad de México
    ------------------------------



  • 34.  RE: Introduce Yourself

    Posted 07-11-2018 13:22
    Hi All,

    My name is Dave, located between Baltimore and Annapolis, MD. I'm probably an outlier for this community in that I'm not currently an engineer and do not work directly with advanced materials.

    That being said, I've run a carbon fiber e-commerce business since 2007, in which we curate and source lifestyle products, personal accessories, and gifts that all use carbon fiber material (and in some occasion other composites such as Kevlar/Aramid).

    I joined SAMPE through the recommendation of @Andrew Becnel who is our local chapter president because I am pursuing the idea of starting my own carbon fiber production/fabrication company. I love the idea of bringing this to the Baltimore/Annapolis area. Since my background is more in business/marketing/sales/e-commerce, I'm trying to take in as much as I can from the manufacturing side.

    I understand conceptually how to produce carbon fiber parts using a few manufacturing processes, but do not have very much real-world experience. Ideally, I'm looking for a local co-founder who would be interested in helping to run this side of the business, though it has been tough finding people with hands-on experience in my area...either way, I'm still looking to learn as much as I can personally. It's likely that I'll go through Abaris, have any of you gone through their training?

    Looking forward to connecting with folks and happy to help others in any way that I can!


    ------------------------------
    David P.
    CFG
    Founder
    Baltimore, MD
    ------------------------------



  • 35.  RE: Introduce Yourself

    Posted 07-17-2018 11:01
      |   view attached

    Hi everyone--

    I'm the founder and president of a start-up called Penelope Mimetics. We develop polymers for textiles, work in technical textiles and, we've recently acquired a large 3D braider that is suitable for the design and manufacturing of braided composites.

    I've joined SAMPE North America to learn more about the theory and practices pertaining to 3D braided composite materials and connect with companies that are working in this domain. I intend to participate in the SAMPE Carolinas chapter and, I look forward to connecting with colleagues in the composite field and learning more about the composite industry.

    Thanks!

    Dennis



    ------------------------------
    Dennis Stevens, President
    Penelope Mimetics
    Myrtle Beach SC
    ------------------------------



  • 36.  RE: Introduce Yourself

    Posted 08-12-2018 01:12
    Hello Everyone,

    Greetings as it is great to be recognized though.   I am John Boyd and a novice when it comes to Material Science but an interested learner if you will.  So, I am intrigued by what I can learn in this group.   I have a degree in economics undergrad and a master's degree in Information Systems graduate level as well as a graduate degree in math master's level.  So, if anyone wants to know more please ask...  I am here to understand what this is all about in the world of mechanization and more.

    ------------------------------
    John Boyd

    Detroit MI
    ------------------------------



  • 37.  RE: Introduce Yourself

    Posted 08-24-2018 18:14

    Hello everyone!

    I'm Adolfo and I study Physics.
    I'm starting my career as young scientific consultant
    & currently developing a new Start Up

     it's a pleasure to be part of SAMPE!




    ------------------------------
    Adolfo Alejandro Romero Angeles
    [Research Assistant & High Impact Entrepreneur]
    ------------------------------



  • 38.  RE: Introduce Yourself

    Posted 08-30-2018 12:49
      |   view attached
    Hello,

    I`m John owner and tooling engineer at Southwest Composites. We specialize in the production of molds and tooling for the composites industry.
    Bladder molds, compression molds, and fiber forge tooling.

    ------------------------------
    John Groth
    Tooling Engineer
    Southwest Composite Works INC
    Albquerque NM
    ------------------------------

    Attachment(s)

    pdf
    Frame mold.pdf   273K 1 version


  • 39.  RE: Introduce Yourself

    Posted 09-28-2018 19:22

    Hi Everyone,
    My name is Rose, I studied materials engineering (metallurgy for bachelor, ceramic eng. for master, and metallurgy for PhD). I recently joined this Group and am very excited to read and share useful topics in this field. I am working in a casting company in Switzerland  and currently I am more involved in process of materials.




    ------------------------------
    Rose Ghaderi
    [JobTitle]
    Georg Fischer
    Novazzano
    ------------------------------



  • 40.  RE: Introduce Yourself

    Posted 10-01-2018 12:10
    Rose,

    I am glad to see your posting. Welcome to SAMPE. I think you will have something of value to bring to SAMPE because you have expertise in Metallurgy and Ceramics, both of which need more representation in our thinking. Your perspectives will be vital to SAMPE's future as a Society.

    Steve Rodgers

    ------------------------------
    Steven Rodgers
    [JobTitle]
    EmergenTek LLC
    South Jordan UT
    ------------------------------



  • 41.  RE: Introduce Yourself

    Posted 12-04-2018 18:08
    Hello everybody,
    My name is Gu Jun, and I joined SAMPE one month ago. I obtained  Master Degree in Material Sciences at the Department of chemical and material engineering in Vrije Universiteit Brussels. After my Master Degree, I worked as Research Scientist in the domain of cementitious composite materials and organic matrix composite materials for characterization of material properties in the university many years. In 2009 I started to work at BYTEC BVBA. BYTEC company focuses on develop own Non-Destructive Test instrument to characterize material properties, especially to characterize isotropic and orthotropic composite material properties (elastic and viscoelastic). In additional the company carries out technology consulting projects as well as technical training and guiding university master students for some NDT techniques.

    If you are interested in our NDT instrument for qualification of your composite material products as well as identification of your composite material properties, don't hesitate to contact me.

    BYTEC bvba
    Stoopsstraat 4
    2330 Merksplas
    Belgium
    e-mail: bytec.bvba2330@gmail.com



    ------------------------------
    Jun Gu
    Managing director
    Bytec BVBA
    Merksplas
    ------------------------------



  • 42.  RE: Introduce Yourself

    Posted 26 days ago
    Hi,
    I am new to the discussion. My name is Nadim Hmeidat, a PhD candidate in Mechanical Engineering at the University of Tennessee, Knoxville. I conduct research under Prof. Brett Compton's supervision. Our research focuses on composite materials development for direct write additive manufacturing (or the so-called 3D printing). We fabricate epoxy-, metal- and ceramic-based composites using novel print heads, achieving high-performance materials that can compete with other composites manufactured conventionally. Glad to be part of the discussion and I will be happy to answer questions related to my research.

    Best.
    Nadim Hmeidat
    nhmeidat@vols.utk.edu

    ------------------------------
    Nadim Hmeidat
    [JobTitle]
    Knoxville TN
    ------------------------------



  • 43.  RE: Introduce Yourself

    Posted 13 days ago
    Hello Nadim,

    Welcome to the MEGA Forum -- feel free to engage with others on all items concerning materials and process engineering. Pose intriguing topics, as questions, find helpful resources from the SAMPE MEGA community, or simply check in to see the latest conversations happening in the industry. We hope this forum finds you well - here are a few quick links for your consideration:

    SAMPE 2019 - www.sampeamerica.org 
    SAMPE Additive Manufacturing Workshop -
    SAMPE North America - www.nasampe.org
    SAMPE 75th Anniversary
    Thanks for stopping by SAMPE MEGA - we're looking forward to supporting your involvement!

    ------------------------------
    CJ James,
    SAMPE
    ------------------------------



  • 44.  RE: Introduce Yourself

    Posted 12 days ago
    ​Hi guys,

    my name is Sam and im working as a Materials, development Engineer at Joyson Safety Systems at Core Engineering Materials and Innovation in Germany!!.

    Basically im always passionate about finding new materials at the market to connect it to an interesting applications as well as finding new technologies that would results in something completely new at the market.

    I  would be glad to connect either here on on linkedin so feel free all to drop me a message to talk more about Polymers and composites materials, technologies.

    Regards,
    Sam Ziadeh

    ------------------------------
    Samer Ziadeh
    Development Engineer, Core Engineering Materials / Innovation
    Joyson Safety Systems GmbH
    Aschaffenburg - Germany
    ------------------------------



  • 45.  RE: Introduce Yourself

    Posted 10 days ago
    Hi SAMPE colleagues,

    My name is Terrance Barkan and I am the Executive Director of The Graphene Council, a community of more than 20,000 materials scientists and professionals from around the globe that have an interest in, or that are working with graphene. (Graphene is a 1 atom thick layer of carbon making it a true 2D material with some extraordinary properties).

    I will be at SAMPE in Charlotte and look forward to meeting you and discussing how graphene can enhance your existing applications or even unlock new solutions.

    For more information in the meantime, please visit The Graphene Council or write me directly at tbarkan@thegraphenecouncil.org.

    See you in Charlotte!

    Terrance

    ------------------------------
    Terrance Barkan
    Executive Director
    The Graphene Council
    New Bern NC
    ------------------------------



  • 46.  RE: Introduce Yourself

    Posted 9 days ago

    Hi All -

    I help customers in multiple industries successfully design and manufacture composite products through enabling technologies for analysis, design and manufacturing solutions that allow for optimization of weight, cost, rate and production quality.

    I'm always look forward to stimulating conversations about industry challenges and best practices. Don't hesitate to contact me.

    David Leigh Hudson
    Portfolio Development Executive - Fibersim
    Siemens PLM Software
    Digital Factory Division
    Mobile: +1 (617) 633-8357
    Email: hudson@siemens.com
    Web: Fibersim

    Siemens PLM Software remove preview
    Fibersim
    Fibersim
    View this on Siemens PLM Software >





    ------------------------------
    Thank You,
    Leigh Hudson
    ------------------------------



  • 47.  RE: Introduce Yourself

    Posted 5 days ago
    Edited by Joseph Flitcroft 5 days ago
    HI All,

    I am the Senior Sales Engineer for Dia-Stron, we manufacture automated single fibre dimensional and mechanical testing equipment for the personal care and composite industry.

    I am new to the composites market so looking to learn as much as I can.

    Joseph Flitcroft | Senior Sales Engineer, USA


  • 48.  RE: Introduce Yourself

    Posted 3 days ago
    Hello,

    I'm a research assistant at the Institute for plastics processing at the RWTH Aachen. My Professor is Prof. Christian Hopmann. My field of studies is the dimensioning of frp under high strainrates.

    Best regards

    ------------------------------
    Jonas Mueller
    [JobTitle]
    Aachen
    ------------------------------